eShield™ insulation is a 3 layer composite comprised of a perforated foil facing, a Microlite fiberglass core and a reflective foil facing.
Flame Spread: 20 (ASTM E84-10a)
Smoke Developed: 10 (ASTM E84-10a)
Full Scale Corner Room: PASS (UL 1715/UBC 26-3)
- Heat Flow Down R 12.82 air to air (ASTM C1363/C1224)
- Heat Flow Up R 9.24 air to air (ASTM C1363/C1224)
- Heat Flow Horizontal R 10.60 air to air (ASTM C1363/C1224)
Direct contact with the fiberglass may cause eye, skin and respiratory tract irritant. Do not rub.
Direct contact with the skin may cause mechanical irritation. If irritation occurs, long sleeves, loose fitting clothing, gloves, and eye protection are recommended. Wash exposed areas with soap and water after handling. Wash clothes separately and rinse out washer after each use.
Flush with running water for a minimum of 15 minutes. Apply sterile eye wash to remove foreign bodies from the eye(s).
If respiratory tract is irritated, remove from exposure. If irritation persists, seek medical attention.
Unusual Fire Hazards: Fiberglass insulation is a non-flammable product. Caution should be used when working close to the facing or packaged material with open flame. Chemicals in plastic packaging products that do not present a health hazard under normal conditions may be released during a fire. Toxic fumes and gases that may result from incomplete combustion include carbon monoxide, hydrogen chloride and low-level cyanides. If breathing is difficult, administer oxygen and consult a physician.
Accidental Release Measures
Avoid dust-generating means of clean-up.
Handling & Storage
Store insulation in a dry location and remove from any source of ignition or flammable products. The information relates only to the particular product and not to the product when used in combination with any other materials. It is the user’s responsibility to take proper precautions when using this product and ensure its own compliance with applicable local and governmental laws and regulations.